Biotek ELX 50 8 Way Head 96 well Strip Plate Washer
8 way head strip plate washer that can wash both 96 well strips or full plates, volume range: 25 to 3000μL well. Dispense precision: <2% CV typical, residual volume <1μL/well, Soak Time: 1 to 600 seconds, processing speed: <130 seconds (3 cycles, 300μL/well). Create, edit, delete and link up to 75 programs onboard from keypad. Cycle and link up to 10 programs to run the most complex routines, Multi-user friendly; total programming control for complex research applications, yet easy to use for routine clinical work, Programmable shaking duration and intensity, Easy to use and maintain with built in maintenance programs and overflow wash/overfill protection, bottom washing and crosswise aspiration protocols. See keypad display. The newest plate washer for Bio-tek, a top of the line strip plate washer, easy to use and program. All connections are color coded for easy user set up. Instrument systems come with fifteen month warranty!
Comes complete with NEW (1) 2 liter Supply/Rinse and (1) 2
liter Waste Reservoir
all connections, bulkheads, angled quick on and off connectors,
silicone tubing.
For extra, or replacement reservoirs, click here!
Catalog #/Voltage |
Instrument Description/Price/# in stock |
P67177
110 Volt
Complete System |
Biotek ELx 50 96 well/$2,995./16
in stock! |
P67175
220 Volt
Complete System |
Biotek ELx 50 96 well/$2,995./16
in stock! |
Finstrip 4 or Finstrip Strip Washer models
Remanufactured
Dispense volumes using fixed program cards, or switch card (Finstrip). Plate Washer includes 8 or 12 way head, one 2 liter waste and one 2 liter supply reservoir, onboard pump, 2 program cards (fixed at 300μL Finstrip 4), or one program switch card (Finstrip) 50-450μL featuring full plate wash or strip washing, soak time 30 sec.-5 min., pause 15 sec., 15 washes, volume dispensing 0-350μL, leave wet or dry, washlo or washhi, stepover/stepoff row, automatic shut down of pump after use. Turnkey system. New and remanufactured models in stock. Perfected system, easy-to-use and very dependable. Thousands sold since 1984, made in Finland! Unbeatable one year parts and labor warranty. All connections are color coded for fast and easy user set up.
Instrument systems come with
24 month warranty!
Comes complete with NEW (1) 2 liter Supply/Rinse and (1) 2
liter Waste Reservoir
all connections, bulkheads, angled quick on and off connectors,
silicone tubing.
For additional reservoirs, click here See comparison here
Catalog # |
Instrument Description/Price/# in stock |
P67104 NEW |
Finstrip with 12 and 8 Way Head $5,300./12
in stock! |
P67106 |
Finstrip with 8 Way Head/$2,695./12
in stock! |
P67107 |
Finstrip with 12 Way Head/$2,695./12
in stock! |
P67103 |
Finstrip 4 with 8 Way Head/$2,195./8
in stock! |

|
Finstrip 8 Way Cell Washer and Elisa Washer
Remanufactured
|
High performance plus simple operation especially designed for gentle and efficient washing of cells. Washing is performed with minimum loss of even suspended cells while membrane bound labels and cell integrity are maintained resulting optimal assay sensitivity.
The Finstrip Cell Washer combines high performance and flexibility with reliability, simplicity and ease of use. This advanced microplate washer meets the exacting standards of today’s assay requirements.
- Gentle effective washing of cells in 96-well microplate
- Adjustable aspiration height and strength.
- Adjustable dispensing height and strength
- Wash head has two dispense needles which spiral into the well creating a gentle vortex
Gentle effective washing
The Finstrip Cell Wash is designed to wash plates in a manner suitable for washing adherent or lightly adherent cell monolayers and other cell-based systems. The needles dispense liquid down the sides of the wells to minimize cell disturbance. Combined with the precision aspiration needle, this guarantees the most effective washing with minimum loss of cells.
Fully adjustable washing
The Cellwash, with its purposely built 8 channel wash head, is fully adjustable for washing volume, aspiration height, aspiration strength, dispensing height, dispensing speed and the number of washes. The ability to adjust the height of aspiration needles and the aspiration strength enables minimal loss of cells from wells. This gives you total control over all cell washing parameters allowing complete optimization of performance with your systems. Using the switches, the plate can be left wet or dry after the final washing.
Technical specifications:
Finstrip Cell Washer and Elisa Washer |
Weight |
10 kg (22 lbs.) |
Wash reservoir |
2 liter |
Waste reservoir |
2 liter |
Wash head |
8 way Cellwash head |
Performance Specifications |
Volume 0-375 µl in 25µl increments |
No. of washing cycles |
1-16 |
Residual aspiration volume |
<5 µl per well (flat bottom plate) |
Aspiration height |
Adjustable |
Dispensing precision |
CV 5% |
Ordering information:
Catalog number |
|
P16157 |
Cellwash 110-120 V AC/60 Hz Remanufactured |
Parts & Accessories |
CW018/48 |
8 way Finstrip Cell wash head |
9741023 |
8 way EIA wash head |
9741022 |
12 way EIA wash head |
9741066 |
2 Liter wash or waste reservoir with cap |
9741002 |
Tubing Pack |
|
|
Tecan Columbus 12 Channel Head 96 well Strip Plate Washer
Remanufactured
Programmable 96 well washer with LCD display features 4 wash modes, 4 wash liquid channels, 30 user definable wash programs onboard with 60 steps per program. Standard 12 way head with 9 software defined plate types and adjustable dispensing speeds increase accuracy and versatility. Volume of solution dispensed 50-3000μL in 50µl steps for washing and 50-400μL for dispensing. Soak time from 1-999 seconds, on board software selectable dispensing, aspirating speeds, and bottom positioning, 4 rinse modes, and programmable strip selection. Accuracy CV:<4% over the plate, residual volume per well <2μL. Includes new pump, line cord and 6 day a week technical support. All connections are color coded for easy user set up.
One year warranty on all models, these are new stil in the box A really great, dependable strip plate washer. New model sells for +7,000.
Comes complete with NEW (1) 4 liter Supply/Rinse and
(1) 4 liter Waste Reservoir
all connections, bulkheads, angled quick on and off connectors,
silicone tubing.
For additional reservoirs and pump systems, click here!
Catalog # |
Instrument Description/Price/# in stock |
P67144
Complete System |
Columbus 96 Well Remanufactured $2,995./8
in stock! |
Biotek ELP 40 8 Way Head 96 well Strip Plate Washer
Remanufactured
Accomodates full
8 way 96 well plate, or use with strips within the plate. 50-300μL 105 seconds for 3 wash cycles. Membrane Panel touch control with selection of 75 wash routines, 1-9 wash cycles, wash volume, flow rate and soak times. Wash methods include bottom washing, double aspiration and multi-speed/amplitude shaking. Liquid flow-through on-board pump 50-3000μL. Soak settings: 0 to 999 seconds in 1 second increments. Vacuum pump: 2 gallon (8L)/min (suction efficiency: 1 to 6 per well). In sequential mode, washer performs the first programmed step on every row you specify and then executes each succeeding step, row-by-row until finished. In Repeat Strip Mode, the entire program is performed on the first row of wells, then repeated on the next row of wells (Strip mode reduces carryover of highly concentrated samples). Programmable aspiration depth expands washer for cell based assays. Shaking amplitude and speed can be adjusted to allow for more intense washing. A really great plate washer for your small lab space. All connections are color coded for easy user set up. Includes onboard pump, line cord and six day a week technical support for all remanufactured models. 60 day warranty!
Comes complete with NEW (1) 2 liter Supply/Rinse and
(1) 2 liter Waste Reservoir
all connections, bulkheads, angled quick on and off connectors,
silicone tubing.
For additional reservoirs and pumps, click here!
Catalog # |
Instrument Description/Price/#
in stock |
P67148 |
Bio-tek ELP 40 Washer
$2,195./6 in stock! |
Dynex MRW Strip Plate Washer
Remanufactured
Flexible
and convenient hard to imagine a wash protocol that can't be programmed on the MRW strip washer, with easy-to-use touchpad control. This unit washes full or partial plates with up to four separate solutions, using either an eight- or 16-way wash head, in fewer than 60 seconds. Flexible wash parameters include dispense volume, number of dispense steps, selection of wash fluid, soak time, and aspirate type. To assure optimal performance, you can program the MRW to perform a self-cleaning step at any time during a protocol or any time throughout the day. On-board self-diagnostic routines automatically assure that the MRW is functioning properly each time it is turned on.
Flexible: Uses 8 way wash head to complete a cycle in
under 60 secs
-
Wash parameters: Adjustable dispense volume, dispense
steps, fluid selection soak time and aspirate type
-
Clean cycle: Fully programmable
Dispense volume: 50-2500 uL per well
-
Clean cycle: Automatic soak time 1-999 secs
-
Wash time: <60 sec/plate in 1 x 8 format
-
Well types: U-, V-, C-, and flat-bottom
-
User definable programs. Save up to
40 wash protocol programs with 10 plate definitions
-
Clean cycle: Automatic soak
time 1-999 secs. Combine prime, dispense,
soak, and aspirate steps in any order,
defining the duration and repetition of each
protocol step
-
Control how vigorously the MRW cleans the bottom of each well by choosing the precise wash head height you need
Comes complete with NEW (1) 2 liter Supply/Rinse and
(1) 2 liter Waste Reservoir
all connections, bulkheads, angled quick on and off connectors,
silicone tubing.
For additional reservoirs and pumps, click here!
Catalog # |
Instrument Description/Price/#
in stock |
P67142 |
Dynex MRW Strip Washer
$2,095./12 in stock! |
Biorad
Model Immunowash 1575 Strip Plate Washer Remanufactured
8 Channel Strip Washer
complete with Tubing, Waste-Rinse-Wash Bottes, User's Manual, Power Cord, and All Fittings
to run the washer. The ImmunoWasher 1575 Washer Is Designed
with one intake port for both wash/rinse.
For additional reservoirs and pumps, click here!
Features |
Benefits |
Up to 75 protocols can be saved and easily modified. Each protocol is a combination
of 7 adjustable procedures (wash, aspiration, dispensing, bottom washing, bottom aspiration, shaking, and soaking) and multiple cycles |
Washing procedures are accurate and efficient at
highest level of optimization
Exact reproducibility of assays and
repeatability of workflows |
Programmable horizontal and vertical needle positions (accurate to within 0.1 mm) to support bottom washing, crosswise aspiration, and overflow washing |
Accommodates assays with special requirements (sediments, coagulants, low volumes, low liquid agitation requirements)
Saves reagents and time |
Overflow washing with circular flow of liquid in each well |
High wash efficiency without compromising
throughput Replaces tedious sequences of repeated aspiration
and dispensing steps |
Crosswise aspiration |
Minimizes residual volume to below 2 μl per well |
Dispenser speed control
Adjustable plate shaking |
Delivers higher volume accuracy
Minimizes bubbles and liquid adherence to well sides |
Easily accessible for cleaning and maintenance
Removable and autoclavable plate carrier
Aerosol protection cover
Preprogrammed disinfection protocol |
Satisfies concerns about use of infectious agents and samples that are sensitive to the environment
Easy decontamination and prevention of contamination |
Integrated and automated vacuum and dispensing pumps |
Ensures accurate and quiet washing, eliminating the need for bulky, noisy external pumps
Improves working conditions for lab personnel
Lowers maintenance costs |
Easy to install 8- and 12-channel manifolds |
Different orientations of the washing procedure in
plate and individual strips are possible |
Specifications
|
Residual well volume |
<2 μl |
Soak time |
0–9.9 sec in strip mode
0–59 min in plate mode |
Overflow washing with circular flow of liquid in each well |
High wash efficiency without compromising
throughput
n Replaces tedious sequences of repeated aspiration
and dispensing steps |
Available manifolds |
8- and 12-way |
Kit storage capacity |
75 kits |
Compatible plate types |
Any flat- or round-bottomed plate |
Dimensions (W x D x H) |
32.5 x 40.5 x 19.3 cm |
Weight |
9.6 kg |
Operating temperature |
15–30°C |
Opsys MW Microplate Strip Washer.
Demo model. The Opsys MW is an economic, full-featured 96-well microplate strip washer. An excellent choice for many laboratories because of its simplicity, ease-of-use, flexible and intuitive protocol definition, and 8-way (column) microplate washing for full plates or strips.
Flexibility:
Providing a surprising amount of flexibility for its size and price with user-definable plate types and wash protocols with significant versatility.
-
Wash whole or partial plates by row with interchangeable 8-way and 12-way wash head (user needs to purchase) separately.
-
Combine prime, dispense, soak and aspirate steps in any order, defining the duration and repetition of each protocol step (soak times can range from 1 to 999 seconds)
-
Define, name, save and password-protect up to 10 microplate definitions
-
Define, name, save, copy and password-protect up to 40 wash protocols
-
Control how vigorously the Opsys MW cleans the bottom of each well by choosing the precise wash head height you need
Performance:
The Opsys MW provides consistent results with low well-to-well variation. Sweep mode aspiration provides minimal residual volume on flat bottom plates.
-
Dispense precision of 5% CV for 96 wells, using 300μL of distilled water.
-
Sweep mode aspiration provides a "sweeping" wash head movement during aspiration to achieve reproducibly low residual volumes
-
Low residual aspirate volumes of < 1μL for U, V, and C bottom microplates; and <5μL for flat bottom plates (with sweep mode)
-
On-board self-diagnostic routines automatically assure that the Opsys MW is functioning properly each time it is turned on
Convenience:
The Opsys MW provides key features that simplify setup, protocol definition, operation and cleanup.
-
Compact dimensions conserve valuable bench space
-
8-way head can be quickly and easily interchanged to wash full or partial microplates by row or column by way of a 12 way head
-
"Show" function provides quick verification of wash head height settings when defining a wash protocol
Comes complete with NEW (1) 2 liter Supply/Rinse and
(1) 2 liter Waste Reservoir
all connections, bulkheads, angled quick on and off connectors,
silicone tubing.
For additional reservoirs and pumps, click here!
Catalog # |
Instrument Description/Price/#
in stock |
P67188 |
Opsys MW Microplate Washer $2,095. |
|